全國熱線服務:
新聞資訊 Top label
- Revolutionizing High-Rise Building Care: The Essential Guide to Building Maintenance Units
- Advanced Locking Plate Technology: Revolutionizing Orthopedic Fracture Fixation
- Digital Pressure Sensors: Transforming Industrial Measurement and Process Control
- Digital Pressure Sensors: Transforming Industrial Measurement and Process Control
- Elevator Fall Arrest Anti-Fall Systems | Reliable Climber Safety Protection Solutions
- Steel Wire Rope Selection And Maintenance For Suspended Platforms
If the pipeline installation does not meet the requirements, oil leakage will occur if the rolled pipe is
The product installation does not meet the requirements:
1. The rolled tube is not bent well
During the process of assembling hard pipes, the product should be bent according to the specified bending radius, otherwise it will produce different bending internal stresses, which will gradually cause leakage under the action of oil pressure. If the bending radius of the hard pipe is too small, the outer pipe wall of the pipe will become thinner and the inner pipe wall will have wrinkles, which will cause the product to have great internal stress at the bend and greatly weaken its strength. When subjected to strong vibration or high-pressure impact, it will easily produce transverse cracks and leak oil; if the bending part of the hard pipe has a large ovality, when the oil pressure in the pipe pulsates, longitudinal cracks will easily occur and oil will leak.
During installation, if the bending radius does not meet the requirements or the hose is twisted, it will cause damage to the hose and oil leakage.
2、Rolled tubeInstallation and fixation do not meet requirements
Common improper installation and fixation include:
(2) If you do not pay attention to the fixation during installation, the product will rotate together when the bolts are tightened, causing it to twist or collide with other parts and cause friction, shortening its service life;
(3) The product clamp is sometimes too loose, which increases the friction and vibration between the clamp and the clamp; sometimes it is too tight, causing the surface (especially the aluminum tube) to be pinched and deformed; these conditions will cause damage and oil leakage;